Basic knowledge of advertising machine application and maintenance

Jun 10, 2021

Deixe um recado

In recent years, with the growth of digital signage, advertising machines, LCD splicing walls, and LCD monitors have been widely used in various industries, and more convenient intelligent office and digital surveillance have become the biggest highlights. Next, I will give you a detailed introduction to the basic common sense of the application and maintenance of the advertising machine.


1. Don't ignore some details


Since the advertising player has been inspected many times by the manufacturer before leaving the factory, and finally passed the screening of consumers when purchasing, during the application process, unless the chip is overheated or the hard disk is burned out, there should be nothing else Noise appears.


2. Frequency power should not be unplugged


Even if the advertising player is forced to shut down, it is necessary to ensure that it is not turned on immediately as much as possible, and the interval should be more than 5 minutes. During the operation of the advertising player, the chip has been working and the hard disk has read information. If the power is suddenly cut off, it is easy to cause irreparable damage to the hardware.




3. Application environment needs attention


During the application process, the advertising player also has the same rated power supply as other electronic devices. If the voltage is unstable, in other words beyond the floating range of the machine, the chip of the HD player may burn out or stop working.


4. Don't forget to clean often


In addition to paying attention to natural ventilation during application, the machine should also be cleaned regularly. Because even if the air quality in our room is good, it is inevitable that dust, grease, etc. will fall into the machine.


When cleaning the stains on the surface of the advertising machine, it is best not to use corrosive chemical reagents or cleaning agents to prevent corrosion of the plating or spray paint on the surface and reduce the service life. As far as possible, use a soft fabric and a little water to clean up stains.


5. Location natural ventilation is very important


It should be noted that the location of the advertising player is smooth and naturally ventilated. It is best not to place it directly opposite the cooling hole of the TV and around the multi-purpose power socket. Since this is often a place where electrical appliances generate a lot of heat, if a high-definition player is placed with them, it may be a situation where masters are used to attack and hurt others and themselves.


There is one more thing to pay attention to in terms of natural ventilation and heat dissipation, that is, some advertising players are packaged particularly well when they are purchased, and they are also equipped with dust caps. Some consumers do not remove the dust caps during application, but that will lead to natural ventilation. Poor, affecting the service life of the machine.


Enviar inquérito