Atualmente no mercado, telas de toque de dois-pontos não são incomuns, capazes de arrastar e ampliar e reduzir. No entanto, um operador cuidadoso descobrirá que, embora produtos diferentes suportem essas funções básicas, por que existem tantas diferenças no uso?
Infrared technology's two-point touch screen has two technologies, fake two-point and true two-point. The so-called fake 2 points means that the technology cannot accurately capture the real coordinates of one of the touch points, but instead realizes the functions of zooming in, zooming out, and partial rotation through changes in the relative position of the touch points.
Generally speaking, apart from complex technical differences, we mainly reflect the difference in touch effects between true 2 points and false 2 points through the following differences (as shown in the table below):
the difference
Picture rotation error rate
Writing disconnection, jumper rate
2 point operation ghost point, drift rate
True 2-point touch screen
0
<>
0
Fake 2-point touch screen
40 percent -80 percent
20 percent -80 percent
40 percent -80 percent
1. In terms of picture rotation:
True 2 points are operated on the touch screen by 2 different touch points to rotate the picture, the picture rotation direction is the same as the touch rotation direction, and there is no error rate;
Fake 2 points on the touch screen with 2 different touch points to rotate the picture, the picture rotation direction is opposite to the touch rotation direction, the error rate of the same rotation direction can reach 40 percent -80 percent .
2. In terms of writing:
True 2 points can always maintain an accurate response to touching the finger. When both hands are drawn at the same time, the error rate of the line broken or jumped is almost equal to zero;
False 2 points have a 20 percent -80 percent error rate in writing with both hands at the same time. For example, if both hands are drawn at the same time, the lines will be broken or jumped.
3. During the 2-point operation:
There is almost no real two-point drift and ghost point phenomenon. True two-point touch screen manufacturers that have unstable technical problems have a ghost point and drift occurrence rate of about 5 percent .
Fake 2-point touch may occasionally show dot drift, ghost dots, etc., and the occurrence rate is 40 percent -80 percent ;
The following briefly describes the main working principle of the infrared touch screen (infrared pair tube touch screen):
1. The principle of fake 2-point infrared touch screen:
Generally, an outer frame is installed in front of the display screen. There is a circuit board in the outer frame, and infrared emitting tubes and infrared receiving tubes are arranged uniformly in the X and Y directions. They form a horizontal and vertical cross infrared matrix one by one. When the user is touching the screen, the touching object (finger or other object) will block the horizontal and vertical infrared rays passing through the position, and the controller can determine the position of the touch point on the screen through calculation.
2. Principle of true 2-point infrared touch screen:
Generally, an outer frame is installed in front of the display screen. There is a circuit board in the outer frame. There are evenly arranged infrared emitting tubes and infrared receiving tubes in the X and Y directions, and scanning is performed by the emitting/receiving devices in the opposite and oblique directions. In a one-to-many mode, a horizontal and vertical diagonal infrared cross array is formed. When the user is touching the screen, the touching object (finger or other object) will block the crossed infrared rays passing through the position, and the controller can obtain the true multi-point coordinate position through calculation.
Traditional infrared touch screens (fake 2-point touch screens) usually can only correctly identify one point, but when two touch objects are placed, the system actually obtains four points of data, namely XA, XB, YA, YB, and these four points The coordinates can be combined into 4 coordinate points, namely A (XA, YA), B (XB, YB), C (XA, YB), D (XB, YA). When the touch points are two points A and B, the fake two-point touch screen cannot determine whether the touch position is A, B or C, D. However, when the two touch points A and B are close to or separated from each other, the distance between the corresponding pseudo points C and D is also close to or separated from each other. By calculating the relative position, the pseudo two-point touch screen can detect two gestures of zooming in and zooming out. However, false two-point touch screens are more prone to misoperation when judging rotation gestures. Generally, when a rotation gesture is required for 2 points, one of the points is fixed, and the other moves clockwise or counterclockwise from the upper right of the fixed point, or requires the touch points to fall separately, so that the system can touch the points separately through the time difference Real location. However, when the 2 touch points of the fake 2-point touch screen (such as: A and B) are in the horizontal or vertical position, the position of the ghost point (such as: C and D) will change, so the rotation action is prone to errors. The specific performance is that the direction of finger movement has not changed, but the direction of rotation of the manipulated object, such as the picture, has undergone a reverse change.
In principle, the fake two-point touch screen cannot completely solve the above-mentioned problems, which will bring instability to the touch operation. According to comparison, the error rate of products from different touch screen manufacturers in the existing market is between 20 percent and 80 percent . However, the true two-point touch screen can completely calculate the positions of the two touch points due to different principles, so there is no such problem.

