O que devo fazer se o computador industrial travar? Quais são as razões

May 25, 2021

Deixe um recado

Quando o computador industrial está funcionando, ocasionalmente encontrar alguns problemas e travar também é um deles. Quedas repentinas às vezes trazem grandes problemas para o trabalho, então como evitar que essa situação aconteça? Antes de tudo, precisamos saber o que causa a falha, que pode ser dividida nos quatro tipos a seguir:


       A. The quality of accessories is poor. Such as CPU, memory stick, graphics card, hard disk, etc. If the quality of the accessories is poor, when the machine installs WIN98, NT4.0 SCO UNIX, it will be found that the installation is not smooth in the past, and some even cannot be installed.

 

       B. Poor contact of the bottom plate. The operating system can be installed smoothly. After the system is installed, the user finds that some user equipment may not be used in the system, and the serial port and keyboard cannot be used, etc., just change the motherboard to another machine.

 

       C. The motherboard itself is faulty. Due to the components of the motherboard itself, the industrial computer host may fail to pass the BIOS self-check after it is started. Some IDE and FDD interfaces are not working, causing system read-write problems and crashes.

 

       D. The host will crash for three to five days for a short period of time, and it will crash for three or four months for a long time. This type of problem is the most difficult to determine the cause. It will not crash when the motherboard is tested alone or when it is not in the user environment. This kind of problem is related to the user system, even the field wiring and the system's anti-interference ability. I hope that when encountering this kind of problem, we should not blindly push the responsibility to the industrial computer, but guide the user to solve the problem from the surrounding environment.


       It can be seen that the reasons for the crash of the industrial computer are more complicated. It is not only related to the configuration problems of the machine itself, such as hard disk, CPU, etc., but also the motherboard failure may also cause the crash, and the user system will also cause the crash, so when it is an industrial computer When a crash occurs, don't just think it's an industrial computer problem, it needs to be investigated from many aspects.


Enviar inquérito